Crude Oil Production

Current data on crude oil, field/lease condensate, and natural gas liquids produced from NGL plants. Updated on a monthly basis.     

积分中值屈服准则解析厚板轧制椭圆速度场

为解决非线性Mises比塑性功率积分困难以及由此导致的轧制功率解析式难以获得的问题,本文通过建立并利用线性比塑性功率表达式对提出的椭圆速度场进行能量分析,得到了轧制力能参数的解析解.文中通过对变角度屈服函数求积分中值,构建了一个新的屈服准则,它是主应力分量的线性组合,在π平面上的轨迹是逼近Mises圆的等边非等角的十二边形,其基于Lode参数表达式的理论结果也与实验数据吻合较好.同时,根据厚板轧制时金属流动速度从入口到出口逐渐增大的特点,提出了水平速度分量满足椭圆方程的速度场,该速度场满足运动许可条件.通过相应的轧制能量分析,获得了基于线性屈服准则的内部变形功率以及基于应变矢量内积法上的摩擦功率与剪切功率.在此之上,通过泛函的极值变分导出了轧制力矩、轧制力以及应力状态系数的解析解,并与现场实测数据进行了对比,结果表明利用本文提出的屈服准则与速度场所建立的轧制力矩与轧制力模型与实测值吻合较好,其中轧制力误差小于5.3%,轧制力矩误差在6%左右.     

Thermal and hydraulic characteristics of a large-scaled parabolic trough solar field (PTSF) under cloud passages

To better understand the characteristics of a large-scaled parabolic trough solar field (PTSF) under cloud passages, a novel method which combines a closed-loop thermal hydraulic model (CLTHM) and cloud vector (CV) is developed. Besides, the CLTHM is established and validated based on a pilot plant. Moreover, some key parameters which are used to characterize a typical PTSF and CV are presented for further simulation. Furthermore, two sets of results simulated by the CLTHM are compared and discussed. One set deals with cloud passages by the CV, while the other by the traditionally distributed weather stations (DWSs). Because of considering the solar irradiance distribution in a more detailed and realistically way, compared with the distributed weather station (DWS) simulation, all essential parameters, such as the total flowrate, flow distribution, outlet temperature, thermal and exergetic efficiency, and exergetic destruction tend to be more precise and smoother in the CV simulation. For example, for the runner outlet temperature, which is the most crucial parameter for a running PTSF, the maximum relative error reaches −15% in the comparison. In addition, the mechanism of thermal and hydraulic unbalance caused by cloud passages are explained based on the simulation.     

A novel hybridized metaheuristic technique in enhancing the diagnosis of cross-sectional dent damaged offshore platform members

Offshore jacket platforms are widely used for oil and gas extraction as well as transportation in shallow to moderate water depth. Tubular cross-sectional elements are used to construct offshore platforms. Tubular cross sections impart higher resistance against hydrodynamic forces and have high torsional rigidity. During operation, the members can be partially or fully damaged due to lateral impacts. The lateral impacts can be due to ship collisions or through the impact of falling objects. The impact forces can weaken some members that influence the overall performance of the platform. This demonstrates an urgent need to develop a framework that can accurately forecast dent depth as well as dent angle of the affected members. This study investigates the use of an adaptive metaheuristics algorithm to provide automatic detection of denting damage in an offshore structure. The damage information includes dent depth and the dent angle. A model is developed in combination with the percentage of the dent depth of the damaged member and is used to assess the performance of the method. It demonstrates that small changes in stiffness of individual damaged bracing members are detectable from measurements of global structural motion.     

机械密封腔流场内粒子对密封腔壁面及波纹管冲蚀分析

为研究机械密封腔内混有固体颗粒的流体,在复杂工况下对密封腔壁面及波纹管表面冲蚀的影响,以CFD理论及方法,采用k-ε湍流模型和离散项DPM模型,对固液混合流场进行模拟分析,获得密封腔内流体中介质作用下密封腔壁面及波纹管外表面的压力场分布,分析不同工作状态下固体颗粒作用下密封腔内壁和波纹管外表面的冲蚀区域分布、固体颗粒在流场中的运动轨迹,以及机械密封工作过程中流场内固体颗粒的逃逸量、运动状态的变化。结果表明:粒子主要受颗粒阻力、浮重力、压力梯度力及波纹管和密封腔表面反作用力的影响;在旋转流场中,粒子作与旋转方向一致的螺旋方式前进;无转速时,冲蚀多发生在靠近入口处的波纹管外表面,旋转流场中,冲蚀多发生在密封腔靠后位置的壁面;随着转速增加,粒子逃逸率下降。研究结论为机械密封腔的设计布局及机械密封装置的优化提供理论依据。     

相场法模拟GaAs衬底上InGaAs异质结表面形貌

本工作采用相场法模拟GaAs衬底上生长的In_(0.3)Ga_(0.7)As多层异质结构薄膜表面。通过引入多序参量,使用半隐性傅里叶谱方法求解Cahn-Hilliard方程可以求得带缓冲层结构的薄膜表面形貌。计算结果模拟了薄膜生长过程,研究显示,使用In0.15-Ga0.85As缓冲层,厚度从1nm增加到4nm,薄膜表面临界波长从34nm提升到80nm。随着缓冲层的厚度从1nm增加到10nm,使用正弦波表面的模拟结果显示,薄膜表面粗糙度从2.87nm下降到0.43nm,随机叠加波表面的模拟结果也类似,表面粗糙度从1.21nm下降到0.18nm。热力学分析和应变分布分析可以解释缓冲层对薄膜表面形貌演化的作用。该模拟计算方式对设计缓冲层结构有很大的帮助,模拟计算的结果可以与实验相比对。     

The efficiency and comparison of novel techniques for cell wall disruption in astaxanthin extraction from Haematococcus pluvialis

The efficiency of various techniques pulsed electric field (PEF), ultrasound (US), high‐pressure microfluidisation (HPMF), hydrochloric acid (HCl) and ionic liquids (ILs) for cell wall disruption in astaxanthin extraction from Haematococcus pluvialis was compared. The results indicated that ILs, HCl and HPMF treatment were shown the most efficient for cell disruption with more than 80% astaxanthin recovery. While the cell wall integrity of H. pluvialis cyst cell was less affected by US and PEF treatment. It was found that imidazolium‐based ILs showed the greater potential for cell disruption than pyridinium‐based and ammonium‐based ILs. Among all the ILs examined, 1‐butyl‐3‐methylimidazolium chloride ([Bmim] Cl) exhibited efficient cell disruption and capability of astaxanthin recovery at mild condition (pretreatment with 40% IL aqueous solution at 40 °C, followed by extraction with methanol at 50 °C) without extensive energy consumption and special facility requirement. In addition, recyclability of ILs was excellent.     

水下循迹航行器水动力学性能数值研究

为了研究低速水下循迹监测航行器的水动力学性能数值计算问题,采用FLUENT软件和SST剪切应力输运模型,通过雷诺时均N-S方程分析流速一定的情况下,取不同攻角、不同水平舵角作为来流条件,研究未安装推进器以及安装推进器且其安装位置不同时,航行器的升力系数、俯仰力矩系数、表面压力分布和流场速度的变化规律。结果表明:在未安装推进器以及推进器的安装位置不同时,随着攻角的变化,升力系数呈线性变化,俯仰力矩系数呈非线性变化;随着水平舵角的变化,升力系数和俯仰力矩系数呈线性变化。当推进器安装在航行器头部时,对航行器流场压力和流场速度变化影响最大;当安装在航行器尾部时,对二者影响最小。对于低速航行器,应尽量将推进器安装在中间靠后位置,以提高航行器的水动力性能。升力系数的试验结果与数值仿真结果之间最大相差7. 51%,阻力系数的试验结果与数值仿真结果最大相差5. 84%,均吻合较好。研究结果可以为低速水下循迹航行器的优化设计和发展提供理论参考。     

激光立体成形TC4钛合金的热力场演化

激光立体成形能够实现高性能复杂零件的精确成形，但成形过程中的高温度梯度极易导致残余应力和变形，最终影响构件的几何精度和力学性能。通过搭建基板单边夹持原位热变形测量系统，探究了多道多层TC4钛合金成形件在激光立体成形过程中基板温度、变形的演化规律，分析了不同扫描策略对构件热应力场的影响。研究结果表明，构件的变形发展受其热历史驱使，扫描策略对成形件的热变形具有显著影响。     

发夹式换热器管束流致振动数值模拟研究

运用计算流体力学方法,采用ANSYS CFX软件对发夹式换热器的壳侧流场进行了三维数值模拟。流场计算中采用多孔介质模型对管束区域进行简化,分析了壳侧流场的速度分布,结果表明:直管段部分的流体湍流强度大于弯管段,且外层管束所在区域为高流速区,受流体冲刷严重。结合流场信息,通过功率谱生成随机激振力,采用ABAQUS软件模拟计算了湍流激振下管束的振动响应,结果显示管束的面外均方根位移远大于面内位移,且弯管部分的振动位移最大。该研究结果可为发夹式换热器的性能分析和优化设计提供参考和依据。